shopping_cart
Basket
(0)
APPLICATOR 4P4
FCFA0
VAT included
It can be clipped on all France bridges. It applies 4 specimens simultaneously on the 5.7 cm wide Cellogel strip leaving 4 marks of the same dimensions as the Figure 1c. Each of the 4 tips applies 0.9 µl on 9 mm. The unloading of the tips is completed after an application time of at least 10 seconds. The base of the specimen holder has 3 rows of 4 drop holders onto which 30 µl are pipetted.
It can be clipped on all France bridges. It applies 4 specimens simultaneously on the 5.7 cm wide Cellogel strip leaving 4 marks of the same dimensions as the Figure 1c. Each of the 4 tips applies 0.9 µl on 9 mm. The unloading of the tips is completed after an application time of at least 10 seconds. The base of the specimen holder has 3 rows of 4 drop holders onto which 30 µl are pipetted. This applicator makes it possible to deposit 12 samples rapidly on three strips already positioned in the tank. If the first notch is used the deposits will be aligned at 27 cm from the cathodic edge. If the last notch is selected the deposits will be aligned 9 mm from the cathodic edge. This applicator serves not only for classical semi-micro electrophoresis with 35 mm run but also for the prolonged semi-micro of 45-55 mm.
PM243008
New
3 other products in the same category:
It can be clipped on all France bridges. It applies 4 specimens simultaneously on the 5.7 cm wide Cellogel strip leaving 4 marks of the same dimensions as the Figure 1c. Each of the 4 tips applies 0.9 µl on 9 mm. The unloading of the tips is completed after an application time of at least 10 seconds. The base of the specimen holder has 3 rows of 4 drop holders onto which 30 µl are pipetted.